Vissonic Conference Microphone
Features
1. Stylish, low profile design with touchable interface
2. Standard CAT5e and RJ45 connectors are used in CLEACON series to provide more convenient on project and maintenance.
3. The connection of MIC units are either hiding underneath or from the rear of the unit, makes it convenient for different request of installation,OLED screen, providing excellent brightness, contrast, wide viewing angle but low power consumption
4. Internal high fidelity loudspeaker
5. Built-in interpretation channel selector
6. The chairman VIS-DIC-T can set as interpreter, delegate.
7. Head-set interface in both sides with volume adjust
8. Line-in interface which allows microphone or other line-in device like cell phone, laptop to pass audio through to perform teleconference
9. The unique AUDIO-LINK digital ring network technology achieve full-digital signal transmission and processing, completely avoid the RF interference from cell phone or similar devices.
10. Strong system robust by the "Hand-in-Hand-Loop-Network" connection method.
11. Timer on display to set certain time for each delegate to speak, will remind user or close the MIC automatically
12. All units can be configured as Chairman or Delegate unit through software settings based on model VIS-DIC-T.
| Button |
Touchable interface, no physical buttons |
| Sound Pickup |
heart type capacitance |
| Display |
OLED display 128 × 32 |
| Sensitivity |
-46 dBV / Pa |
| Maximum power consumption |
2.0W |
| Connection |
CAT5 / CAT6 cable + snap |
| Equivalent noise |
20dBA (SPL) |
| Main material |
ABS |
| The maximum sound pressure |
125dB (THD <3%) |
| Weight |
1.1kg (with microphone) |
| Dimension |
185W × 130 D× 50H mm (without microphone) |
| Operating temperature |
0 ℃ to + 55 ℃ |
| Color |
Black |
| Directivity |
0 ° / 180 °> 20 dB (1 kHz) |
| Headphone load |
16Ω |
| headphone volume |
10mW |
| Headphone jack |
3.5mm stereo |
| Input impedance |
2kΩ |
| SNR |
70dB |
| Frequency response |
20 ~ 20000Hz |
Functions
Compliance with IEC 60914, GBT 15381-94
The unique AUDIO-LINK digital ring network technology achieve full-digital signal transmission and processing, completely avoid the RF interference from cell phone or similar devices.
One CAT5e cable to transmit 64 channel audio and other signals
High fidelity sound by zero loss audio transmit technology, 48K audio sampling frequency, 20Hz~20KHz response frequency
"Hand-in-Hand-Loop-Network" connection makes the system always working perfectly no matter changing discussion unit or having any malfunctioned units
This system assigned to each unit independently ID to avoid duplicate ID conflict
Support AGC(Automatic Gain Control)/AFC(Adaptive Feedback Cancellation)/ANC(Active Noise Control )/Mix (Auto-Mix) technology
Build-in functions for intercom
Hot-swap for any system unit, and the controller has auto-recovery function
Precise directional microphone head with anti-wind microphone foam cover, with two-color LED indicator
Button for MIC ON/OFF, Priority & Apply Answer button for chairman unit
Built-in high fidelity speakers, it automatically mutes to prevent howling when press MIC ON
Head-set interface in both sides with volume adjust
Without using PC software, our conference controller still owns following settings:
Limit on the number of speaking persons: By Setting the number of active units at the same time(Number is 1/2/4/6/ units)
Discussion modes:
"OPEN" Free for all, limited by the active units setting by controller, "OVERRIDE" First in First out,"FREE" Turn on the MIC freely up the max. quantity, "APPLY" To apply then to speak
Work with our HD camera and video matrix switcher, it applies camera auto tracking function
The unit showing real time on the screen, and count-down timer for speaking person.
Product Tags:
|
|
Wired Digital Discussion Conference Table Microphone With OLED Display 128 × 32 Images
|
